Resource Library

As the leading provider of materials reference data Key to Metals AG will present the key aspects of how the Total Materia database can support and improve the accuracy of simulation results whilst reducing cost, optimizing material usage and elim...

Renault presents how they've adopted SimSolid to significantly speed up design time and gain deep design insights upfront in the design process.

Find out how SimSolid is used to run multiple structural simulation iterations directly on their CAD geometry in minutes with amazing accuracy.

The crankshaft of an engine is a highly dynamically loaded component that is continuously optimized and optimized in terms of design and production technology. In order to be able to reproduce this in the simulation, the essential influences must ...

Altair's acquisition of DEM Solutions allows customers to design and develop power machinery while simultaneously optimizing how this equipment processes and handles bulk materials. EDEM's Discrete Element Method tool interfaces with Altair's lead...

The occurrence of cavitation negatively affects the performance of hydraulic systems. The impairments range from increased noise levels to severe and life-limiting wear of machine parts. Cavitation in hydraulic systems can be prevented by early in...

Most traditional simulations take too long to complete and takes significant toll on the vehicle manufacturer’s capability to arrive at an optimal design that considers styling and aerodynamic performance. In this webinar, we introduce you to Alta...

In this webinar, we address challenges common to conceptual modeling engineers and the powerful new time-saving features and workflows available in the HyperWorks X user experience.

This webinar, presented jointly between Altair and the UK's leading CFD consultancy, TotalSim, demonstrated how the latest model build technologies can drastically accelerate your external aerodynamics programmes, freeing up Engineers' time to pro...

In this webinar, you'll learn about OptiStruct's nonlinear analysis performance at scale as well as Altair's powerful and cost-efficient solutions for on-premise or virtual compute clusters.

Altair released the Knowledge Works platform which is used for data preparation, data prediction and data visualization. In this webinar an introduction to the Machine Learning capabilities of Knowledge Works is presented. The webinar contains:

A brief introduction to the concept of Machine Learn

This webinar will demonstrate the possibilities and procedures to optimize a casting design by the help of casting process simulation. In combination with the simulation, we'll show how one can use what we call parameter and geometry optimization....

Enterprises are becoming more data-driven and scaling up their data collection. But how is the data quantity transformed into data quality? How does one gain insight and condense complex data from several sources into a simple, coherent strategic ...

Traditionally, products are created with a draft, which is then specified by taking into account external factors. The next step is to validate, test them as prototypes and adapt the design. If simulation is used as a virtual test, this cycle can be accelerated.

The foundation for a successful de

This webinar introduces the benefits of PollEx for fast PCB design viewing and exploration, analysis (including signal integrity and thermal), verification (considering electrical, assembly, and manufacturing constraints), and how these solutions ...

One of the great myths that surround vehicle dynamics simulation is that it’s complicated and takes months to develop. Using the Maranello motorsport Ferrari 458 victory at the Bathurst 12 hour as a case study, you're going to be shown how to use ...

Product success is increasingly reliant on innovation. A multidisciplinary system engineering approach is more critical now than ever. Performing in-the-loop system-level simulation and testing early in the design stage is key to enabling organiza...

Maple offers many signal processing tools that help you extract meaning from your data. From transforms and spectrograms to filter design and cepstrum analysis, you can use these tools in an environment that lets you document your analysis as you do your calculations.

No Tradeoffs Required!

There has always been a required compromise when it comes to structural simulation. This tradeoff required users to select a tool that excels in either depth/accuracy OR speed (you have likely experienced this yourself).

With Altair SimSolid, this compromise is no longe

Simulate the effects of large displacements, material nonlinearity and advanced contacts with Altair OptiStruct™.

OptiStruct is the industry standard for the optimization of topology, composites, mechanisms and additive manufactured parts, but over the past three decades, it has evolved into a co

The key element of an electric vehicle (EV) is the battery and batteries are known to produce heat during their charge-discharge cycle. An efficient thermal management system (TMS) is of paramount importance. The battery TMS affects the cost, lif...

Replacement of traditional combustion engines with an electric powertrain, bring electro-mechanical induced tonal and high-frequency whine noise. In addition, tire and aerodynamic turbulent noise become more prominent in the absence of a standard ...

Sendyne’s CellMod™ FMU is the first physics-based virtual battery software that will simulate battery behavior under any condition with an accuracy better than 97%.

This technical webinar is addressed to battery systems designers who want to understand the advantages of using an electrochemical

Electric Vehicles (EV) are complex systems and need to be connected, automated, lighter & smarter all at once. This calls for systems engineering where different systems are seen whole instead of in silos. Experience e-Mobility Simulation using Al...

Traction Motor play key role in the electric vehicle/hybrid electric vehicle (EV/HEV) development process. The design of a High-Performance e-Motor is a complex undertaking. Engineers have conflicting constraints to consider including efficiency, ...

Welding is a commonly used technique in different industries to join two metal parts. Parts that are welded, tend to fatigue in the welded regions, even in a well-designed structure. Therefore, it is necessary to make a fatigue assessment of the w...

Webinar from Prof. Dr. D.W.J. Pulle

As the use of 3D data throughout the produce lifecycle broadens, it is ever more essential to prepare high-quality 3D CAD geometry models to streamline the entire simulation process. CADdoctor is a tool to streamline CAD geometry preparation to ma...

An introductory webinar to Humanetics Finite Element (FE) Dummy Models, available through the Altair Partner Alliance. FE Dummy Models is a large suite of highly detailed and validated finite element crash dummy models to virtually simulate the be...

Altair SAO enables you to visualize and analyze global software inventories and utilization rates across facilities, divisions, departments, and users. With SAO, it’s easy to pinpoint underutilized assets for better business planning and forecasti...

Frequency domain methods for fatigue analysis and/or general random response analysis have experienced a resurgence over the last few years due to improved technology and better computational processes. Today, a complete range of models can be pr...

3-matic 14 introduces an improved Lattice module (formally known as Lightweights module), making your workflow more efficient thanks to a simplified UI/UX and new features in the Lattice module. Next to this, an enhanced Texturing Module to speed...

A good Design is not complete unless it meets desired performance and qualifies for efficient manufacturing. Design of sheet-metal components demand the following, From a Design perspective - if sheet-metal can be used for intended design, their sizing & shape, choice of material, weight and cost.

Are you a new TAITherm user or just need a refresher on the basics? Follow along as Lauren, our talented thermal engineer shows you the components you need to create the best models for successful thermal analysis. She will bring you inside the so...

This webinar outlines how 1D block diagrams can be successfully combined with 3D non-linear multibody systems for model based development of mechatronic systems. Examples include an active suspension systems and a robotics application.

Every organization has different workload needs, and those needs can change from day to day and minute to minute. How can you know what HPC resources you’ll need?

Join Altair expert Matt Bonyak to find out more about managing, optimizing, and forecasting your compute resources, including capacity

Productivity drops when users are waiting in long job queues. With seamless cloud bursting, you can scale up during peak times and enable flexible capacity to meet business needs.

Join Altair HPC and CAE expert Ian Littlewood to find out how cloud bursting can help your organization. He demonstra

More and more companies need fast, affordable, high-fidelity simulations that accelerate product design, taking into account performance and appearance. In addition to traditional CPU-based simulation methodologies, they're beginning to explore GP...

Learn about the special capabilities available for vehicle simulations (cars & trucks) with Altair MotionSolve™

Frequency domain methods for fatigue analysis and/or for general random response analysis have experienced a resurgence over the last few years due to improved technology and better computational processes. Today, a complete range of models can be...

Example of using either 1D modeling or 0D modeling to simulate a basic electrical circuit system