Keyword
Categories







Industry













Brands






215 Results
Page: 2   3  
Automotive NVH Development - Past, Present, and Future Technology Challenges
Automotive NVH Development - Past, Present, and... Dr. Per-Olof Sturesson, Senior Director Driving Dynamics and Noise & Vibration Centre at Volvo Cars, keynote presentation at the 2018 Global ATC.

Over the last decades, the utilization of CAE has increased substantially in the vehicle NVH refinement process. Today CAE is a fully integrated in the NVH development due to significant innovations in computer algorithms, application software and hardware systems. The numerous challenges with respect to NVH driven by the introduction of new technologies can be mitigated by means of extensive utilization of CAE delivering products faster to the market. The presentation will cover a retrospective, current status and an outlook.
View More
The Digitalization Trends and Structural Design in Maritime Industry
The Digitalization Trends and Structural Design... Dr. Toshiro Arima, Corporate Officer, Director of Rule Development and ICT Division at ClassNK, keynote presentation at the 2018 Global ATC.

In this presentation, the current state of digitalization of maritime industry, structural rules and evaluation software used for hull structural design will be introduced. In addition, the efforts being made by ClassNK, one of the world's largest classification societies, to use digitalization to ensure ship safety will be also introduced.
View More
Innovation in AEC - High Tech/Low Tech
Innovation in AEC - High Tech/Low Tech Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC.

During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost while working on a custom and double curved surface for one of the largest and most iconic construction sites of the globe.
View More
Experimentation Matters: Driving Innovation Through Simulation
Experimentation Matters: Driving Innovation Thr... Prof. Stefan Thomke, William Barclay Harding Professor of Business Administration at Harvard Business School, keynote presentation at the 2018 Global ATC.

Why do companies constantly come out with exciting innovations while others have great difficulty? Professor Thomke shows that an organization's ability to innovate depends on constantly experimenting with new products, processes, customer experiences and business models. During his keynote, Prof. Thomke explains why business experimentation is so critical to the management of innovation, underscores the huge potential of simulation (and new digital platforms), and outlines what managers must do to integrate them successfully. Drawing on two decades of research in multiple industries, he provides striking illustrations of how companies execute innovation more effectively.
View More
Technology as Key Enabler for Product Innovation
Technology as Key Enabler for Product Innovation Sam Mahalingam, CTO at Altair, keynote presentation at the 2018 Global ATC.

As a technologist I have been following the technology trends and have identified three trends that can immensely change the product innovation landscape and they are: High Performance Cloud Computing, IOT / Smart Connected Product and Big Data / Machine Learning. Altair strongly believes we have all the necessary technologies required for the Product engineering digital transform and the value add being: a) Cloud HPC increasing the pace of product innovation b) IoT & Analytics improves the product performance and c) Data management increases the product engineering efficiency.
View More
The World is Built on Engineering
The World is Built on Engineering Dr. Uwe Schramm and James Dagg, CTOs at Altair, keynote presentation at the 2018 Global ATC.

This presentation will illustrate the power of Altair’s simulation technology through several practical examples applied to some of the most common product development challenges in automotive, aerospace, and other industries.

Starting with simulation in the early phases of concept design, designers can take advantage of CFD simulation to explore and validate how different designs impact the aerodynamic performance of a vehicle. Viewers will be shown how complex, detailed nonlinear airframe simulations can be modeled and performed quickly and accurately. The presenters will also explain how multiphysics problems like e-powertrain development can be solved with a model-based development approach, which considers electrical and electro-magnetic simulation of systems and sub-systems.
View More
Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected
Industry 4.0 – How Digitalization Makes Weight ... Kai Thräne, Manager Weight & Balance Research & Development at Airbus Helicopter presents at the 2017 European ATC.

In the context of Industry 4.0, most enterprise processes must become more digitized. A key element will be the evolution of the traditional product development toward a connected and highly efficient ecosystem, where humans, machines and resources communicate with each other and work collaboratively.
View More
When Simulation Turns into Reality
When Simulation Turns into Reality Dominique Moreau, Head of Airframe Technical Authority, Airbus presents at the 2017 European ATC.

This presentation will present the today’s state-of-the-art numerical simulation and the very latest progress Airbus did on the topic. The presentation will go through what remains to develop in the future so to make numerical simulation much more effective in the design process of an aircraft.
View More
The Secret Lives of Models
The Secret Lives of Models Gael Salles, Director of Computer Aided Product Engineering Technology at Schneider Electric presents at the 2017 European ATC.

After a brief introduction of the changes in the Energy Landscape, an analysis of the life of models will be presented from the viewpoint of system engineering. Along with the paradigm shift in the use of models, the power of the multidisciplinary use of models will be approached such as for Design Space Exploration, Verification-Validation for cyber-Physical offer or maintenance purposes.
View More
Vehicle Concept and Structure of the New Opel Ampera-e
Vehicle Concept and Structure of the New Opel A... Dr. Hennig Holzmann and Dr. Boris Künkler of Adam Opel present at the 2017 European ATC.

The new Opel Ampera-e offers the customer a great car with the optimum balance regarding performance, package, mass and cost.
View More
Design the Difference – Simulation Driven Innovation in Car Body Design
Design the Difference – Simulation Driven Innov... Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC.

The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, development cycles must be shortened and development costs reduced. Early concept development is a project stage where change costs are low and design freedom large. Thus, improvement of early concept development to mature designs faster and with better design balance must be a key goal of vehicle development.
View More
To the Moon with Additive Manufacturing - Optimization, Space and Everything in Between
To the Moon with Additive Manufacturing - Optim... Yoram Malka, Head of Mechanical Engineering Department at Israel Aerospace Industry presents at the 2017 European ATC.

Increasing the performance of a system is a constant challenge engineers in all application areas face. This challenge specifically important in the aerospace world where weight reduction is one of the key factors defining the success of a project.
View More
Design the Difference: Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup
Design the Difference: Artemis Racing’s use of ... Peter Bentley, Design Team Member at Artemis Racing presents at the 2017 European ATC.

The increase in velocity enabled by advanced structural composites and on-board control systems has been a true game changer, and the future of sailing will be increasing dependent on simulation driven design.
View More
How do you scale empathy?
How do you scale empathy? This presentation was recorded at the UK Altair Technology Conference on 19th September, 2017. During his speech, ... View More
Designing Flexible Composite Solutions in HyperWorks
Designing Flexible Composite Solutions in Hyper... This 16-minute long presentation from Simpact provides insight into how the company is utilising simulation techno... View More
Sunshine School Bus Design Story - Industrial Design for Automotive
Sunshine School Bus Design Story - Industrial D... Sathiya Seeland, Head of Styling for Product Design at Ashok Leyland, presents at Converge 2016 in Bangalore, India. View More
Design for High Performance Recreational Products
Design for High Performance Recreational Products Pankaj Dubey, Country Head and Managing Director at Polaris India, presents at Converge 2016 in Bangalore, India. View More
The Digitalization of Biomimicry Design from the Ocean
The Digitalization of Biomimicry Design from th... Sebastian Möller, Projektleiter at ELiSE Alfred Wegener Institut, presents at Converge 2017 in Essen, Germany. View More
Development of a New Lightweight Aluminum Profile for a Glass Balustrade
Development of a New Lightweight Aluminum Profi... Gabriele Romagnoli, Head of Structural Engineering at Farone, presents at Converge 2017 in Essen, Germany. View More
A Tooling Revolution for Plastic Injection Molding
A Tooling Revolution for Plastic Injection Mold... Stefan de Groot, Technologist Additive Manufacturing at PROTIQ, presents at Converge 2017 in Essen, Germany View More
Simulation Driven Design in the Cloud
Simulation Driven Design in the Cloud Chad Zamler, Marketing Director of solidThinking, presents at Converge 2017 in Essen, Germany. View More
Bend-It – Rethinking Customized Orthopaedic Devices Using Additive Manufacturing
Bend-It – Rethinking Customized Orthopaedic Dev... Dustin Ahrendt and Felix Schmitt from Technische Universitat Dresden present at Converge 2017 in Essen, Germany. View More
Design Research Experiences at ZH CoDe
Design Research Experiences at ZH CoDe Filippo Nasetti, Senior Associate at Zaha Hadid, presents at Converge 2017 in Essen, Germany. View More
Master Class: How to Design for Additive Manufacturing
Master Class: How to Design for Additive Manufa... This Master Class held at Converge 2017 in Essen Germany, presents the making of the 3iPRINT Project, which was a ... View More
Design for the Future: 5 Trends You Need to Know
Design for the Future: 5 Trends You Need to Know Christine Outram, Chief Product Officer at Veritas Prep, presents at Converge 2017 in Los Angeles, California. View More
Build a Rocket
Build a Rocket Tim Morton, Director of Industrial Design at Newell Brands, presents at Converge 2017 in Los Angeles, California. View More
Taming Smart Materials to Behave
Taming Smart Materials to Behave Doris Sung, Founder of DOSU Studio Architecture, presents at Converge 2017 in Los Angeles, California. View More
Additive Manufacturing Design
Additive Manufacturing Design Jason Lopes, Production Development Engineer at Carbon, presents at Converge 2017 in Los Angeles, California. View More
Towards Real-time Topology Optimization
Towards Real-time Topology Optimization Hod Lipson, Professor of Engineering and Data Science at Columbia University, presents at Converge 2017 in Los Ang... View More
High Performance, Dynamism and Autonomy for Humans
High Performance, Dynamism and Autonomy for Hum... Greg Lynn, Principal at FORM, presents at Converge 2017 in Los Angeles, California. View More
Mega Data, Mega Structure, Mega City
Mega Data, Mega Structure, Mega City Michael Peng, Technical Director and Senior Associate at Gensler, presents at Converge 2017 in Los Angeles, Califo... View More
Design of Permanent Magnet Axial Flux High Power Wind Turbines Generators (MW range)
Design of Permanent Magnet Axial Flux High Powe... Design of Permanent Magnet Axial Flux High Power Wind Turbines Generators (MW range) View More
Modelling Insulating Parts in MV HV Equipment with Flux
Modelling Insulating Parts in MV HV Equipment w... Modelling Insulating Parts in MV/HV Equipment enables to - To predict and avoid dielectric breakdown - To comput... View More
Lattice Optimized Brake Pedal Study
Lattice Optimized Brake Pedal Study The following presentation reviews the design and development of a Lattice Optimized (LO) automotive brake pedal. ... View More
Using Flux2D in Development of PMSM Fault Detection Algorithms
Using Flux2D in Development of PMSM Fault Detec... The need for fail-safe operation of permanent magnet synchronous machines in applications requiring high reliabili... View More
Integral Numerical Characterization of Thermal and Lubrication Performance of Hybrid and Electric Drive Systems
Integral Numerical Characterization of Thermal ... The physics of the simulated processes is inherently multiphase and involves transient phenomena of various time s... View More
Automatic Reproduction of Supervisory Control System Logic Diagrams with High Fidelity Functional Simulation Purposes using SolidThinking Embed
Automatic Reproduction of Supervisory Control S... This work presents the GT2 Energia methodology for the automated creation of control logics for high fidelity simu... View More
Development of mm-Wave Automobile Pre-Collision System (PCS) Radar Testing Surrogates and Procedures
Development of mm-Wave Automobile Pre-Collision... Automotive radar operating in the 77 GHz band is primarily used for advanced driver assistance systems (ADAS) and ... View More
Intro Presentation to Virfac from GeonX
Intro Presentation to Virfac from GeonX Comprehensive slide deck that covers everything from the problems Virfac addresses to simulation setup and results. View More
We Have the Tools, But Let’s Not Lose Sight of the Knowledge
We Have the Tools, But Let’s Not Lose Sight of ... Rafa Corell, CEO at Indigraf, presents at Converge 2016 in Essen, Germany. View More
Space 4.0 or the Next Paradigm for the Space Industry
Space 4.0 or the Next Paradigm for the Space In... Franck Mouriax, General Manager of Structures at RUAG Space, presents at Converge 2016 in Essen, Germany. View More
Master Class: Using a Crowdfunding Tool for a Start-up
Master Class: Using a Crowdfunding Tool for a S... David Suriol, Co-Founder of Vortex Bladeless, presents at Converge 2016 in Essen, Germany. View More
Designing APWorks’ Light Rider – How the First 3D-Printed Motorcycle Came to Life
Designing APWorks’ Light Rider – How the First ... Daniel Schneider, Technical Sales Manager at Airbus APWorks, presents at Converge 2016 in Essen, Germany. View More
Biomimetically Inspired Topology Optimization
Biomimetically Inspired Topology Optimization Irmgard Lochner, Professor and Consultant at University of Applied Sciences of Biberach, presents at Converge 2016... View More
Keynote: Modern Architecture – Design Process, Tools and Technology
Keynote: Modern Architecture – Design Process, ... Neb Erakovic, Director Structural Design at CH2Mmace, was a keynote presenter at Converge 2016 in Essen, Germany. View More
Optimization of Railway Bolster Bracket for Antiroll Bar
Optimization of Railway Bolster Bracket for Ant... Juan Manuel Romero Cortes, Calculation Lead Engineer at Alstom Transport Spain, presents at Converge 2016 in Essen... View More
Functional Architectural Sculpture
Functional Architectural Sculpture Il Hoon Roh, Artist/Architect, presents at Converge 2016 in Essen, Germany. View More
CFD Oilsplash Simulation in Driveline CAE
CFD Oilsplash Simulation in Driveline CAE A brief presentation on how GKN Driveline performs CFD Oilsplash Simulation using nanoFluidX. View More
Experimental and Numerical Investigation of Churning Losses in Powertrain Components
Experimental and Numerical Investigation of Chu... A brief presentation on how Magna is predicting and improving powertrain efficiency with nanoFluidX. View More
The Amphyon ASAP Principle
The Amphyon ASAP Principle Assessment, Simulation, Adaption, Process View More
Simulation Aided Additive Manufacturing
Simulation Aided Additive Manufacturing An overview presentation on using simulation software for additive manufacturing. View More
System-level Modeling, Simulation and Analysis with MapleSim and Maple
System-level Modeling, Simulation and Analysis ... In this webinar Maplesoft experts will show you how to get the best out of your copy of MapleSim, the advanced sys... View More
OptiStruct V14.0.230 Feature Presentations Demo Models
OptiStruct V14.0.230 Feature Presentations Demo... The zip file contains feature presentations and demo models for the 27 OptiStruct features released in V14.0.230 View More
OptiStruct V14.0.220 Feature Presentations Demo Models
OptiStruct V14.0.220 Feature Presentations Demo... The zip file contains feature presentations and demo models for all the 21 OptiStruct features released in V14.0.220 View More
OptiStruct V14.0.210 Feature Presentations and Demo Models
OptiStruct V14.0.210 Feature Presentations and ... The zip file contains feature presentations and demo models for all the 35 OptiStruct features released in V14.0.210 View More
OptiStruct V14.0 Feature Presentations Demo Models
OptiStruct V14.0 Feature Presentations Demo Mod... For each of the 70 new features in OptiStruct 14.0, there is an individual presentation and demo model. View More
Using Analytical Approach with Finite Element Analysis for Coupling Magnetic and Thermal Analysis for Motors
Using Analytical Approach with Finite Element A... Thermal analysis is a key factor when designing motors. We propose to link the studies of electromagnetic and the... View More
Study the Influence of Air-gap Variation on Axial Forces in Axial Flux Permanent Magnet Motor Using 3D-FEM
Study the Influence of Air-gap Variation on Axi... This paper describes the effect of air-gap variation on performance of a 28 pole axial flux permanent magnet motor... View More
Numerical Modeling and Experimental Analysis of the Magnetic Noise of the Single-Phase Inverter-Fed Permanent Split-Capacitor Motor_Andrei NEGOITA_OPTIM
Numerical Modeling and Experimental Analysis of... Abstract- The paper presents a FEM approach for studying the influence of the capacitor value on the magnetic nois... View More
Analyze Design and Control Aspects of Linear Machines Using Co-simulation
Analyze Design and Control Aspects of Linear Ma... This research work describes the permanent magnet linear machines, their characteristics, control and applications... View More
Low Frequency EMC Analysis of Power Systems and Equipments
Low Frequency EMC Analysis of Power Systems and... Presentation slides by Enrico Vialardi View More
3D Calculation and Modeling of Eddy Current Losses in a Large Power Transformer
3D Calculation and Modeling of Eddy Current Los... Elimination of hot spots and reduction of eddy current losses in structural parts is one of the important constitu... View More
Influence of Discrete Inductance Curves on the Simulation of Round Rotor Generator Using Coupled Circuit Method
Influence of Discrete Inductance Curves on the ... This paper presents a study on the influence of the discretisation of the inductance curves on a detailed coupled... View More
Investigation of Electromagnetic and Thermal Behavior During Fast Dynamics in a PMSM Flux 2D/3D and Motor-CAD Simulation
Investigation of Electromagnetic and Thermal Be... 2013 Flux Conference Presentation View More
Hall Effect Magnetic Sensors Design for Automotive Application
Hall Effect Magnetic Sensors Design for Automot... Samir GUERBAOUI – R&D Engineering View More
Transverse Flux Induction Heating of Magnetic Non Linear Sheets
Transverse Flux Induction Heating of Magnetic N... FLUX Conference 2013 Presentation View More
Design Optimization of Traction Motors for EV Applications
Design Optimization of Traction Motors for EV A... Increasing concerns on energy security and environmental pollution by fossil fuel engines have pushed significant ... View More
Enhancing Surface-breaking Flaw Detection by Induction Thermography Using Flux
Enhancing Surface-breaking Flaw Detection by In... 2014 Flux Conference Presentation View More
Reluctance Synchronous Motor Optimization
Reluctance Synchronous Motor Optimization 2014 Flux Conference Presentation View More
Design and Simulation of an Axial Gap Electromagnetic Brake with Flux 3D FEA Package
Design and Simulation of an Axial Gap Electroma... 2014 Flux Conference Presentation View More
FEM Simulation Tool for Electromagnetic NDT System in Different Inspection Situation and Visualization Platform
FEM Simulation Tool for Electromagnetic NDT Sys... Dr. Yasmine GABI Dr. Bernd Wolter Dr. Olivier Martins Andreas Gerbershagen View More
EMC Modeling of an Industrial Variable Speed Drive With an Adapted PEEC Method
EMC Modeling of an Industrial Variable Speed Dr... This paper presents an adapted partial element equivalent circuit (PEEC)-based methodology applied to the modeling... View More
A New High Efficiency Technology For The Induction
A New High Efficiency Technology For The Induct... In recent years, an innovative DC induction heating concept has been proposed in order to increase the efficiency... View More
Temperature Prediction And Thermal Management For Composite Magnetic Controllers Of Induction Coils
Temperature Prediction And Thermal Management F... ABSTRACT. Temperature control of magnetic controllers (concentrators, cores, shields, shunts) is an essential par... View More
A 3D Numerical Fem Model For The Simulation Of Induction Welding Of Tubes
A 3D Numerical Fem Model For The Simulation Of ... In the present paper, two simulation strategies for tube induction welding process are presented. Coupled electro... View More
High Efficiency Motor Design for Electric Vehicles
High Efficiency Motor Design for Electric Vehic... Flux Conference 2012 presentation View More
Analysis of Hybrid Motor and Drive for Automotive Application
Analysis of Hybrid Motor and Drive for Automoti... Flux Conference 2012 Presentation View More
Verification of Fault Condition Behaviour of a Synchronous 2-Pole Generator Using Flux 2D Finite Element Analysis Software
Verification of Fault Condition Behaviour of a ... Flux Conference 2012 presentation View More
Flux API in Induction Heating Applications
Flux API in Induction Heating Applications 2014 FLux Conference Presentation View More
PBS OSS and Roadmap - Subhasis Bhattacharya
PBS OSS and Roadmap - Subhasis Bhattacharya PBS Open Source Same code base –latest release 14.1 Dual license AGPL/commercial (x.1 / x.2) Support availabl... View More
Using Flux and InCa3D for an Induction Heating Device: Evolutions Since 2010 Flux Conference
Using Flux and InCa3D for an Induction Heating ... Presented at the 2013 Flux Conference View More
Analytical Model of Permeance Variation Losses in Permanent Magnets of the Multipole Synchronous Machine
Analytical Model of Permeance Variation Losses ... Permeance variation in the air gap of the permanent-magnet synchronous machine induces eddy-current losses in its ... View More
Electromagnetic Study of a Transformer
Electromagnetic Study of a Transformer Presented at the 2015 Flux Conference View More
Electromagnetic and Mechanical Analysis of a Linear Actuator for House Appliance
Electromagnetic and Mechanical Analysis of a Li... Presented at the 2015 Flux Conference View More
Boosting HyperWorks Further with Electromagnetic Simulation
Boosting HyperWorks Further with Electromagneti... An overview of FEKO's capabilities, key applications, industries and features. View More
Composite Plate Optimization with Practical Design Constraints
Composite Plate Optimization with Practical Des... Composite free size optimization has the potential to generate weight savings and performance improvements for man... View More
Altair Leveraging Disruptive Cloud Technologies
Altair Leveraging Disruptive Cloud Technologies As decreasing hardware prices and attractive business models are democratizing high-performance computing (HPC) re... View More
Design Methodologies for ALM and Lattice parts
Design Methodologies for ALM and Lattice parts Design for additively made parts has become a very hot topic. Many engineers see the potential for topology optimi... View More
Advance Electromangnetic Simulations and their Applications in Oil & Gas Industry
Advance Electromangnetic Simulations and their ... Advances in computational electromagnetic tools have made electromagnetic (EM) simulations possible for various ap... View More
Advanced Design, Analysis and Optimization of Composite Structures
Advanced Design, Analysis and Optimization of C... With stricter requirements on performance and weight, in many cases, composite materials are now becoming the natu... View More
Multiphysics - A New Generation of Simulation
Multiphysics - A New Generation of Simulation The application of CAE early in a product’s design cycle can make an important difference in its cost and function... View More
How Advanced Simulation will Impact the Offshore Industry both Now and in the Future
How Advanced Simulation will Impact the Offshor... The easy days of Oil and gas extraction is over, and the ability to extract Oil and Gas from harsh enviornments is... View More
Challenges to Extending Design Verification and Optimization in Completion Tool Development
Challenges to Extending Design Verification and... The oil and gas industry has shifted dramatically in the past year. The forecast for the industry is extremely dif... View More
Automated Finite Element Model Creation using Structural Condition Data for Marine & Offshore Assets
Automated Finite Element Model Creation using S... Advanced structural integrity management software is capable of using a structural Computer Aided Design (CAD) geo... View More
FEA Based Design Optimization to Mitigate Anchor Cage Impact Damage Risk
FEA Based Design Optimization to Mitigate Ancho... The power of Finite Element Analysis (FEA) simulations can be effectively used for failure analysis and design opt... View More
Leveraging Geometric Shape Complexity, in Optimal Design for Additive Manufacturing
Leveraging Geometric Shape Complexity, in Optim... Additive manufacturing (AM) technology enables the possibility of realizing highly efficient, optimized structural... View More
nanoFluidX Overview Presentation
nanoFluidX Overview Presentation Introductory presentation offering information about the particle-based CFD software from FluiDyna. View More
UK ATC 2015: How Analysis & Optimisation Help Meet the Time Consstraints in F1
UK ATC 2015: How Analysis & Optimisation Help M... Presentation by Simon Gardner, Sahara Force India View More
UK ATC 2015: Automated Post Processing of Multimodel Optimisation Data
UK ATC 2015: Automated Post Processing of Multi... Presentation by Markus Schemat, BMW Group View More
View All
Page: 2   3  

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!