Resource Library

Component level simulation of selective laser melting process − VTT Pipe

VTT has been testing AM process simulation tools for inclusion in their design for AM workflow. Through these tests, Additive Works’ Amphyon software was found to predict component level geometric distortion values that corresponded well with meas...

Customer Stories

Duratec

Czech company Duratec Ltd. develops handmade bike frames using both aluminium and composite materials. For a recent project at Duratec presenting the latest approach in development of carbon fiber optimization of the bike frame, Altair HyperWorks ...

Customer Stories

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid™ to evaluate the biomechanics of bone stresses.

Customer Stories

Imperial Auto has Successfully Validated the Contact Pressure for O-Ring by Contact Analysis using Altair OptiStruct™ Solution

Established in the year 1969, Imperial Auto is one of the biggest integrated manufacturers of ‘Fluid Transmission Products (FTPs) in the world. The company has eight dedicated manufacturing and assembly plants in India. The grand vision of the com...

Customer Stories

Case Study: Taking the Lead in Formula E - High-Performance Racing with System-Level Modeling

A leading Formula E team approached Maplesoft to develop dynamic models of their car, hoping to find new ways to tweak their systems for optimal performance.

Customer Stories

Minimising Interior Noise in Electric Vehicles

National Electric Vehicle Sweden (NEVS) leverages use of the Altair Squeak and Rattle Director in identifying and minimising risks of interior noise in electric vehicles.

Customer Stories, Videos

U-Shin

U-Shin is currently employing Altair Click2Cast to perform testing and optimization to create sound, redesigned automotive parts.U-Shin has seen significant time and cost savings by utilizing Altair Click2Cast.

Customer Stories

Wilson Golf/Driver vs. Driver

Altair’s work on Driver vs. Driver, Wilson Golf’s television competition that followed aspiring golf club designers in their journey to develop Wilson’s next club in production. Our industrial design team worked with each of the contestants to dev...

Customer Stories

Top Use Cases: HUByx

Presentation introducing a few of the top use cases for the human FE model, HUByx.

Customer Stories

PSA Groupe Discusses the Simulation of Squeak and Rattle Noise in its Vehicles

In this interview, Sebastien Gourg, CAE Methods, Expertise and Support Engineer from PSA Groupe gives us insight into his experience of working with Altair ProductDesign during the implementation and customization of the Squeak and Rattle Director...

Customer Stories, Videos

Auburn University applies HyperWorks to Optimize the Design of Composite Suspension Components and Monocoque for a SAE Formula Student Racecar

To optimize the car performance, the Auburn University SAE Racing Team focused on selected components that were most promising in terms of mass reduction with equal or increased stiffness. HyperWorks enabled them to reduce component mass-to-stiffn...

Customer Stories

Developing a New Safety System for the Rail Industry with Sharma & Associates

Sharma & Associates (SA), a Chicago-based consulting firm that is focused on providing engineering solutions to the railroad industry, led the effort. Since 1995, SA have delivered safe, effective and efficient solutions to its customers, which in...

Customer Testimonials, Videos

Texas Instruments

Using Altair Embed, Texas Instruments was able to develop an embedded simulation of an entire system.

Customer Stories

Getting it right the First Time; how FE-Simulation with RADIOSS supports Sigma Connectivity in Streamlining the Development Process

Simulation is extensively used in the
early development phases at the Sigma
Group, where about 10-15 engineers are
working with different types of simulations.

Customer Stories

Using HyperWorks to Develop Human Body Models for Vehicle Crash Simulation

Wake Forest Baptist Medical Center is a leading research university in biomedical sciences and bioengineering that provides students and faculty with outstanding opportunities for personal and professional growth.

Customer Stories

FIAT Customer Story

FIAT chose Altair ProductDesign as a partner to perform a pilot project to investigate squeak and rattle. The project focused on studying issues on the FIAT UNO, a vehicle made exclusively for the South American market. Altair ProductDesign sugges...

Customer Stories, Videos

Re-Loc

Re-Loc is a UK based company that developed a new product to help to accelerate the process of positioning metal reinforcement bars inside concrete bricks. The Re-Loc product is a clip that fits tightly inside the brick’s cavity and attaches to th...

Customer Stories

Anadolu Isuzu Increases Truck Safety with HyperWorks Products

Safety Engineer Caner Kara is talking about their usage of Altair products in the design process of trucks and buses at Anadolu Isuzu.

Customer Stories, Video Testimonials

EDAG: Developing Commercial Vehicles Inspired by Nature

As Germany's largest independent engineering
partner to the worldwide automotive industry,
EDAG is continuously seeking for new technology and for innovative processes to streamline vehicle development.

Customer Stories

Fully automated in a single process: Optimization and manufacturing of CFRP components

Use of HyperWorks and adapted threestep optimization process for Composite materials integrated in the production process

Benefits:process suitable for large volume seriesflexibility in productionshort learning curve for userslight and yet stiff components
/li

Customer Stories

Computational Analysis of Quadriceps Tendon Force Following Total Knee Replacement Surgery Leads to Improved Patient Knee Flexure

Anterior knee pain is a significant complication following total knee arthroplasty (TKA) surgery. The inability to freely extend/flex the knee has a crucial influence on patients daily activities including walking, lifting and rising from a chair....

Customer Stories

HardMarque

HardMarque coupled topology optimization with additive manufacturing to conceptualize and refine the design of a piston. The final piston design is 23.5% lighter than the original design. 

Customer Stories

Reducing Weld Distortion by 93% with HyperStudy

Gestamp Tallent Ltd is a world class designer, developer and manufacturer of cutting edge, chassis structural and suspension products, body in white structures, modules and systems for the automotive industry. Gestamp used the BMW MINI front subfr...

Customer Stories

Peter Macapia, LabDORA

Architect Peter Macapia aims to change perceptions of how buildings can look; generative design software aids in imaginative engineering and architecture projects, integrating design and testing in the same space.

Customer Stories

Scania Customer Story

Squeak and rattle phenomena are studied in the automotive industry in an attempt to reduce the cabin noise and as a result, give a better ride quality and comfort to occupants. In the case of Scania’s Cabin Development Department, this kind of sim...

Customer Stories, Videos

Simulation Tools: Driving the Future of Design

The Clemson University Deep Orange 3 program introduced future engineers to analysis software, enabling them to develop a novel sports car concept architecture.

By Dr. Paul Venhovens
Concept To Reality Winter 2013

Customer Stories

Case Study Sogeclair

Case Study about Sogeclair's use of HyperWorks

Industry: Aerospace interiors

Challenge: Development of new flooring concept to fix the cabin seats while realizing a lighter structure, adjustable panels for all types of aircraft, and an easier installation and
maintenance.

Altair Solution:

Customer Stories

Evenflo

Evenflo employs topology optimization and generative design simulation for “sustaining engineering” where fast turnaround is essential for functional improvements of  infant car seats design.

Customer Stories

Creactive Design

Using Optimization to Improve the Design of a Classroom

Product design consultancy and structural engineering partner, Creactive Design, wanted to explore the possibility of utilizing optimization technologies to improve the design of a cross-functional roof for an innovative new c

Customer Stories

Samsung Uses OptiStruct to Redesign Washing Machine Component for Optimized Weight and Material Usage

To carry out optimization on the pulley, Suzhou Samsung chose OptiStruct, a key
component of Altair’s HyperWorks suite of computer-aided engineering tools and a
modern structural analysis and optimization solver. “OptiStruct provided us with important optimization features,” said Mr. Cheng, “such

Customer Stories

HyperWorks, especially OptiStruct is one of the central tools supporting the CAE efforts of BASF Engineering Plastics

Mathematical optimisation methods can provide significant support in virtual CAE part development. In the early phases of the project topology optimisation affords valuable clues to the design of the geometry of the part.

Customer Stories

Faster Design Changes with HyperWorks’ Morphing Technology

In the development of engine components PSA determines the lifetime of the intake manifold with a complex thermo mechanical calculation. Since the development process is distributed between PSA itself and a supplier, a design change of the intake ...

Customer Stories

Ron Mendell

Hollywood concept artist Ron Mendell converts sketches to fully rendered digital 3D models, incorporating real world materials, dimensions and constraints.

Customer Stories

Automotive Lighting

Automotive Lighting uses free-form modeling software to create concepts for customers in a fast and flexible way. Concepts are presented visually  in daytime and nighttime conditions using photorealistic rendering.

Customer Stories

The Art of Packaging to Protect Cultural Assets

Simulation tools isolate the cause of undesirable shipping loads on museum’s cultural treasures.

By Nobuyuki Kamba, Ph.D.
Concept To Reality Summer / Fall 2012 Subscribe to C2R Magazine

Customer Stories

Unilever

Optimizing Packaging Designs & Reducing Prototype Costs

To remain at the forefront of innovation within the male grooming market, Unilever, constantly looks for ways to differentiate their products from competitor offerings. For the Lynx (Axe) brand, Unilever needed to adopt a simu

Customer Stories

Cleveland Golf Drives Product Innovation Through Simulation and Optimization Using HyperWorks

Much more goes into a golf club than simply wood, iron and graphite. To shape the performance, the distinctive appearance, the personalized feel and even the sound of the club striking the ball, manufacturers must precisely engineer every aspect o...

Customer Stories

HyperWorks helps to improve development processes at F.S. Fehrer Automotive GmbH

F.S. Fehrer Automotive GmbH in Kitzingen is using the HyperWorks Suite to develop seat parts, form cushions and complete vehicle interior systems. The engineers use HyperWorks and especially RADIOSS for static and modal analysis. The seat of a veh...

Customer Stories

Altair SmartSight™ Turns Utility Operational Data into Valuable Information with Milsoft Visual Analytics

Milsoft Visual Analytics is a powerful business analytics module developed by Altair in partnership with Milsoft Utility Solutions. Through a direct integration of Altair’s SmartSight™ business intelligence software with the Milsoft database schem...

Customer Stories

Putting Simulation Muscle Behind a Sporty Concept Car

Optimization technology delivers innovative suspension design for Alfa Romeo's sleek concept car.

Customer Stories
360 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!