Resource Library

Supporting Blake Leeper’s Road to the 2016 Rio Olympic Games

Altair Thinklabs is proudly working together with Eastman Innovation Lab and Blake Leeper, US Paralympics Gold Medalist, on a clean sheet, human-centric design approach to advance running prosthetics technology.

Videos

What’s the Secret to Product Innovation?

Find out how we can help increase your innovation intelligence™ in order to grow, expand and succeed.


Videos

Arup Uses the Latest Simulation Technologies for Architectural Design

Arup has determined the anticipated conditions throughout the interior of a complex architectural space through computational fluid dynamics (CFD) modeling. In this video Caroline Lama, Façade Engineer at Arup NY, explains how HyperMesh has been u...

Videos

Ping Golf: Using CAE and HPC for Virtual Prototyping

In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.

Video Testimonials

Ford's Thoughts on Relationship with Altair for Lightweighting

John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.

Video Testimonials

RUAG Space Builds Reliable Satellites with HyperWorks

“Throughput time” or “Time to Market” is a key element for spacecraft structure. Structures are the first element required to start the integration of the spacecraft and it is essential that they can be delivered in time. However, late inputs requ...

Videos

Ford Research Center - Interview with Dr. Niels Pasligh

Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.

Video Testimonials

Additive Manufacturing of a Satellite Antenna Bracket

Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.

Video Testimonials

Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.

Video Testimonials

Specialized Wins at Le Tour de France with Altair HyperWorks

Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.

Video Testimonials

Phil Hall from Caterham Composites Discusses a Composite Optimization for a Racing Yacht

Phil Hall, Managing Director of Caterham Composites, discusses some of the challenges involved in the design and manufacture of carbon fiber composites for the automotive and aerospace markets. During the interview, Phil reveals details of a joint...

Videos

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Alta...

Video Testimonials

Interview with Richard Slade on the EADS Astrium ExoMars Project

This interview with Richard Slade from EADS Astrium gives an insight into the ExoMars Space exploration project. Richard discusses the goals of the project and some of the engineering challenges faced when designing the landing systems for the Rov...

Videos

TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.

Video Testimonials

Honeywell Aerospace - Reducing the Weight of Aircraft Engines

Brian Cottrell, Chief of Structures at Honeywell Aerospace, discusses how Altair ProductDesign applied HyperWorks' optimization technology, OptiStruct, to minimize the weight of new aircraft engines.

Videos

Additive Manufacturing Design

Jason Lopes, Production Development Engineer at Carbon, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Showcase Video: RAMDO

Introductory Video to RAMDO from RAMDO Solutions. RAMDO is an uncertainty quantification, reliability analysis, and design optimization software platform.

Videos

A Tooling Revolution for Plastic Injection Molding

Stefan de Groot, Technologist Additive Manufacturing at PROTIQ, presents at Converge 2017 in Essen, Germany

ATC Presentations, Videos

Application of Machine Learning for Engineering Problems

Presentation by Fatma Kocer, VP Business Development Design Exploration at Altair.

Engineering design and operational decisions depend largely on engineers understanding of applications. This includes assumptions made to simplify problems to solve them. However, these assumptions often in

ATC Presentations, Videos

Altair's New Fatigue Platform, Altair HyperLife

Presentation by Hariprasad Gowda, OptiStruct Program Manager - Aerospace and Byung Soo Kang, Technical Specialist at Altair.

Even for complex computationally intensive problems, the UI must be simple and easy to use. Here we introduce the all easy to use, easy to learn fatigue analysis platfo

ATC Presentations, Videos

Functional Architectural Sculpture

Il Hoon Roh, Artist/Architect, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

How to Design Die-Casting Parts with Altair Inspire Cast

Presentation by El Abidi Ahmed, CAE Manager - Senior Expert at U-Shin Group.

ATC Presentations, Videos

Detailed Nonlinear Model for the Analysis of a Wind Turbine Pitch Bearing

Presentation by Aitor Fernandez, Mechanical Engineer at IK4-Tekniker.

The mechanical behavior and failure mechanisms of a wind turbine pitch bearing are very different from those of other bearings types designed for traditional applications. On the one hand, there is the effect of the low r

ATC Presentations, Videos

Tokyo Institute of Technology

Tokyo Institute of Technology discusses the benefits of using PBS Professional.

Video Testimonials

Multiscale Designer Product Video

Multiscale Designer can help achieving more accurate and cost saving results by looking into the individual constituent of composite materials. The tool is well suited for woven, short and long chopped fiber composites and integrates with Altair's...

Videos

Quoting & Tooling: How to Improve Quoting through Casting Simulation

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

At the beginning of a project there is often the wish to calculate components even though there is no order yet. It is shown how a component can be calculated to identify specific problem areas without much effort and without high cos

ATC Presentations, Videos

Numerical Simulation of Distortions Induced During the SLM Process with Radioss 

Presentation by Laurent Van Belle, R&D Project Manager at IPC.

In order to analyse and control the dimensional quality created by SLM processes, an explicit numerical method has been developed by Altair to predict internal stresses and distortions. This numerical tool allows to study the

ATC Presentations, Videos

Automatic Generation of Thousands of Linear Loadcase Combinations for Efficient OptiStruct Static Simulations and Post-treatment with HyperView

Presentation by Samuel Ducarouge, Mechanical Engineer at Air Liquide.

During Cryogenics Pipes mechanical analysis (Liquid Oxygen, Hydrogen or Helium transport) automatic generation of load case combinations has been needed in order to avoid error from "hand made" combinations, to gear up

ATC Presentations, Videos

First-time-right Design of Matching Circuts for Complex Antenna dn RF Applications

Presentation by Jussi Rahola, CEO of Optenni.

The modern mobile phones and other wireless devices, matching circuits are commonly used to tune the antenna to operate at the desired frequencies and to broaden the operation frequency range of the antenna.

The goal of matching cir

ATC Presentations, Videos

Vehicle NVH Design and Development at Jaguar Land Rover using NVH Director

Presentation by Dr. Andrew Burke, Jaguar Land Rover.

Jaguar Land Rover is integrating Altair’s NVH Director into their Vehicle NVH development process. This will enable the formalization of model requirements and processes, ensuring that vehicle models are built to consistent standards an

ATC Presentations, Videos

Display Manager Saves Workflow Time at Ping Golf

“Using Display Manager has really saved us a lot of time. It’s the most significant thing we've done since the original jump to HPC….It’s saving us almost half a day, every day, and it really streamlines our process and gets us to that final answer so much quicker.”
-- Eric Morales, Engineer and De

Video Testimonials, Videos

Saving Lives with Simulations: CEDREM Collaborates with DuPont on Ballistic Protection Solutions

Presentation by Edouard Ferry, CEDREM.

This study is a first step to study human body behavior during ballistic impacts and find injury thresholds. It combines many HyperWorks specificities such as composite modelling, hyper elastic material law, high speed impacts, equations of state, bi

ATC Presentations, Videos

Editing and Debugging Python Scripts for use as Process Automation Tool with Other Products

Presentation by Franck Delcroix, VP, Program Management Math & Systems & Kamalraj Rajagopal, Senior Application Engineer at Altair

ATC Presentations, Videos

Optimal AM Part Design Combines Advanced Design Tools and DfAM Thinking

Presentation by Marc Saunders, Director of Global Solutions Centres at Renishaw.

Most design for additive manufacturing (DfAM) is not really worthy of the name - 'adapt to AM' would be a better description. Parts are often designed for function rather than manufacturability, requiring a f

ATC Presentations, Videos

Concept Design with Altair Inspire

Concept Design with Altair Inspire seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

APWorks Light Rider: Optimization Process

First 3D-printed Motorcycle by APWorks (Airbus Group) called Lightrider. Altair's software OptiStruct was used for inspiration of the organic structure of the motorcycle.

Videos

To the Moon with Additive Manufacturing - Optimization, Space and Everything in Between

Yoram Malka, Head of Mechanical Engineering Department at Israel Aerospace Industry presents at the 2017 European ATC.

Increasing the performance of a system is a constant challenge engineers in all application areas face. This challenge specifically important in the aerospace world where weight

ATC Presentations, Videos

Digital Development at Hyundai Motor Group

Dr. Byungsik Kang is explaining how upfront engineering with FEA methods made a big impact at Hyundai Motor Group. He also explains the importance of designers using simulation for their own need at the early stage of development. Last but not lea...

Video Testimonials

Designing Optimized Aluminum Castings with Fatigue Life Considerations

Andras Tanos, R&D Engineer at FemAlk ZRT, talks about how they have used Altair solutions for topology optimization of an engine part.

Video Testimonials, Videos

Experimentation Matters: Driving Innovation Through Simulation

Prof. Stefan Thomke, William Barclay Harding Professor of Business Administration at Harvard Business School, keynote presentation at the 2018 Global ATC in Paris, France.

Why do companies constantly come out with exciting innovations while others have great difficulty? Professor Thomke shows tha

ATC Presentations, Videos
250 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!