Resource Library

Altair Knowledge Hub Datasheet

Altair Knowledge Hub is a browser-based platform offering team-driven data preparation and a centralized data marketplace to speed collaboration and drive governance across the enterprise.

Datasheets

Guerrilla Gravity

For pioneering a new material application and technology without a road map, Guerrilla Gravity used Altair OptiStruct in the early design design phase. The result was the development of lightweight, high-performance bikes, that are 300% more impac...

Customer Stories

Catapult Tutorial 2: Actuators, Motors and Springs

Using Inspire Motion, learn how to set up a motion simulation of a catapult. This video covers the setup of actuators, motors and springs

Tutorials

Catapult Tutorial 1: Ground, Rigid Groups, Joints and Contacts and Results

Using Inspire Motion, learn how to set up a motion simulation of a medieval catapult. This video covers the setup of ground, rigid groups, joints and contacts, and results

Tutorials

Wearable IoT Technology Helps Combat Epilepsy

Despite the prevalence of epilepsy, it can take years to diagnose correctly and treat, with monitoring being costly. A European technology leader in smart remote-monitoring medical solutions found a better way to diagnose and monitor epilepsy. It ...

Use Cases

Generation of Antenna Array Excitation

See how Altair Compose can be used for the automatic generation of antenna array excitations. You can seamlessly perform the necessary calculations, data formatting and output for use with Altair Feko.

Videos

Predicting Multipacting for RF Design Optimization: Field Strength Measurements in a Coaxial Waveguide

Tech-X presents a highly efficient method of predicting multipacting for RF design optimization with the FDTD PIC code VSim. Multipaction is a commonly encountered problem RF engineers face, that causes significant damage to RF structures, in whic...

Webinars

Altair HyperWorks Defense Brochure

HyperWorks is a wide-ranging set of engineering analysis and optimization tools that is used throughout every major industry. See how HyperWorks is used for Defense in this brochure.

Brochures

Model-Based Development Suite Brochure

Leverage simulation-driven innovation to design and engineer products for concept studies, control design, system performance optimization, controller implementation and testing.

Brochures

Amphyon 2019 - New Simulation Capabilities For More Stable Processes

This webinar presents a general overview of the Amphyon 2019 software, including all alterations, as well as the new Thermal Simulation module and deeper insights to Support Optimization.

Webinars

Altair Tailored Solutions Datasheet

Altair understands that design processes are very specific to individual companies. As part of our commitment to enable our customers to create innovative design solutions efficiently, our services group routinely tailors Altair HyperWorks™ soluti...

Datasheets

Model-Based Development of Multi-Disciplinary Systems

Readily simulate complex products as systems-of-systems throughout your development cycle – from early concept design, to detailed design, then hardware testing (HIL). Combine mechanical models with electrical models (in 0D, 1D, and/or 3D) to enab...

Technical Papers

Matelys Showcase Video

AlphaCell for quick and accurate sound package design 

Videos

Lay-Up Simulations to Choose the Best Fabric Pattern for an Aeronautic Radome

This article focuses on weather radars mounted on small airplanes. They help planning routes before take-off and adapting during the flight depending on weather conditions.

Customer Stories

Altair SmartSight Datasheet

SmartSight is a cloud-based analytics platform for embedded, big data, and IoT applications. Architected for an optimized self-service user experience, the platform simplifies data visualization, exploration, and analysis.

Datasheets

Altair SmartCore Datasheet

Altair SmartCore is a cloud-native platform, which offers an integrated set of services and features to help you easily connect your things to the digital world. It provides a framework for building powerful industry applications, which optimize e...

Datasheets

Improving Electric Vehicle Range with Advanced Losses Computation Considering PWM Across a Full Duty Cycle

Introducing electric traction in automotive brings new challenges for the design of electric machines. Nowadays designers have to consider increasing constraints like efficiency, temperature, weight, compactness, cost but also stricter regulations...

Webinars

Wireless Network Design for Railway Scenarios, Including Tunnels and Metro Stations

Key challenges for train/metro operators are increasing traffic volumes, ensuring passengers safety and security during their journey, as well as providing real time multimedia information and access to social networks in stations and tunnels. To ...

Webinars

SimLab Tutorials - Natural Convection Around a Hot Cylinder

Create a tetra mesh with CFD boundary layer; apply gravity and define heat source; apply initial and temperature boundary conditions; create symmetry planes; visualize results as contour or as vectors

Training Materials, Videos

SimLab Tutorials - Thermal FSI of Exhaust Manifold

Extract fluid surface from the solid; create CFD tetra mesh and boundary layer; apply boundary conditions with constraint option activated; run and post-process steady state analysis

Training Materials, Videos

SimLab Tutorials - Topology Optimization with Manufacturing Constraints

Create RBE connectors; create LBC and load cases; define the design space for a topology optimization; define responses; create manufacturing constraints; set an optimization objective; run an optimization with OptiStruct

Training Materials, Videos

SimLab Tutorials - Process Recording using Templates_ConRod

Use mesh-, LBC- and loadcase templates during a process recording; record a process including solver setup and solver execution

Training Materials, Videos

SimLab Tutorials - Parametric DOE Optimization using CAD Software Creo

Create a CAD parametrized model in PTC creo; create a project in simlab; run a project using interactive mode; set up a DOE study and run the experiments

Training Materials, Videos

SimLab Tutorials - Bore Distortion

Import a results file with split faces; create a coordinate system; compute the bore distortion; view and export bore distortion results

Training Materials, Videos

SimLab Tutorials - TFSI_AutoSolve

Import model containing a CFD solution; check the loads and boundary conditions created on a second solution; create a loadcase that included the output temperature and pressure from the CFD solution; review the mapped loads and results

Training Materials, Videos

SimLab Tutorials - Transient Flow in a Mixing Elbow

Create a navier-stokes flow transient solution; apply average velocity inlets and define outlet; create convective wall and define symmetry plane; define initial conditions; create material and define solid and fluid properties; defineproper solut...

Training Materials, Videos

SimLab Tutorials - Topology Optimization with Pattern Constraints_Y Bracket

Create RBE connectors; work with specifications for loads and loadcases; set up a topology optimization including pattern constraints; run an optimization with OptiStruct; view and post-process optimization results

Training Materials, Videos

SimLab Tutorials - Post-Processing Optimization Results

View and post-process results of topology optimization

Training Materials, Videos

SimLab Tutorials - Non Linear static Analysis_flex plate

Apply symmetry constraints; apply enforced displacement constraint; create 3d bolt with pretension; create advanced contacts; create loadcase; modify solution parameters; solve and review the results

Training Materials, Videos

SimLab Tutorials - Process Recording using Parameters_ConRod

Record a process into JavaScript or Pythonscript using a set of process parameters; re-run the recorded script using different parameter values

Training Materials, Videos

SimLab Tutorials - Groups and Colors in Automation

Use color information to create groups; create groups automatically from features; obtain edge groups from faces and bodies; use boolean operations between groups; run a project in different models

Training Materials, Videos

SimLab Tutorials - Parametric Optimization using HyperStudy - Part I

Start recording a nominal problem; create parameters; import a parametrized CAD file; create a 2D/3D mesh using the parameters; solve and define the study responses

Training Materials, Videos

SimLab Tutorials - Topology Optimization with Solutions - Bracket

Create a linear static solution, define loads and boundary conditions then compute; define a topology optimization, design space, constraints, response and objective; export the optimized shape as .stl; import the .stl file and perform a mesh clea...

Training Materials, Videos

SimLab Tutorials - Parametric Optimization using HyperStudy - Part II

Create a new study inside HyperStudy; register solver script; setup nominal problem; conduct a DOE study; build a fit model; optimize on the fit

Training Materials, Videos

SimLab Tutorials - Natural Convection Around a Hot Cylinder

Create a tetra mesh with CFD boundary layer; apply gravity and define Heat source; apply initial and temperature boundary condition; create symmetry planes; visualize results as contour or as vector

Training Materials, Videos

SimLab Tutorials - Turbulent Flow in a Mixing Elbow

Import custom ribbon; create a tetra mesh with CFD boundary layer; apply CFD boundary conditions; run a steady state turbulent flow analysis; visualize results as contour or as vector

Training Materials, Videos

SimLab Tutorials - Scripting with Process Recording_ConRod

Record a process into JavaScript or Pythonscript; re-run the recorded script on a different model

Training Materials, Videos

SimLab Tutorials - Conjugate Heat Transfer

Create a tetra mesh with CFD boundary layer; work with turbulence and temperature equations; define CFD boundary conditions based on inflow average velocities and convective heat flux; define symmetry plane; create material and define properties; ...

Training Materials, Videos

SimLab Tutorials - Setting-up a Model for Molding Process

Import, position and inspect a CAD model; create mesh controls, surface mesh and organize the parts; create solution and define polymer properties to the bodies; define initial and boundary conditions; apply solver settings, export the deck and so...

Training Materials, Videos

SimLab Tutorials - Linear Steady State Heat Convection Analysis

Create a steady state heat transfer solution; apply thermal loads such as constant temperature and uniform convection; solve and visualize grid temperature

Training Materials, Videos
1605 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!