Resource Library

Gulplug

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid™ to evaluate the biomechanics of bone stresses.

Customer Stories

Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

With over 2 decades of experience in manufacturing Aluminum Heat-exchangers such as Condensers, Evaporators, Heaters, Radiators, Oil Coolers, IHX and Roof AC units, Pranav Vikas (India) Private Limited (PVL) today is one of the largest and most di...

Customer Stories

Case Study: Reliability-Based Stochastic Mobility Maps

This case study shows how RAMDO software, when used in conjunction with computer simulations, provides improved mobility mapping.

For efficient mission planning of troop movement, the Department of Defense needs reliable mobility maps. These maps are important for decision makers to plan routes

Customer Stories

Motorcycle Crankshaft Modeling with SimLab at BMW Motorrad

Learn about the semi-automated motorcycle crankshaft modeling process developed at BMW Motorrad based on Altair's pre- and post-processor SimLab. The scripts developed take the FE model generation time down from 2 weeks of manual work to half a day.

Customer Stories, Video Testimonials, Videos

Case Study: GE Power Sets World Records for Gas Turbine Combined Cycle Efficiency using Flow Simulator

Flow Simulator is GE Power's day-to-day workhorse for designing the secondary flow
circuit within a gas turbine engine.

Customer Stories

Optimization of Photovoltaic (PV) Mounting Structures – Savings on Material and Cost

Photovoltaic specialist Thesan, a subsidiary of global manufacturer Savio S.p.A, manufactures, and distributes mounting structures, consisting of a so-called Purlin, a Rafter, and a Pole (and Hat), designed to withstand potentially occurring loads...

Customer Stories

Sujan CooperStandard Achieves Lightweighting and Performance Targets with Altair

Sujan CooperStandard manufactures (anti-vibration) NVH products for leading automotive companies. Currently, the automotive industry is under extreme pressure because of environmental norms and has to adhere to stringent government policies relate...

Customer Stories

Iowa State University

Cyclone Racing utilized topology optimization and generative design to decrease the mass of its FSAE vehicle by generating a new design concept for its wing mount achieving 67% weight reduction of the bracket.

Customer Stories

Better Indoor Climate thanks to Simulation and Optimization

Kampmann GmbH is an internationally leading specialist for heating, cooling, air-conditioning and integrated building automation. Within their virtual development process they are using the Altair HyperWorks® software suite, in particular AcuSolve...

Customer Stories

Less Interior Squeak and Rattle Noise Using a Simulation Driven Design Approach

In the development of new vehicles, the PSA Group aimed to detect Squeak and Rattle (S&R) problems before availability of physical testing. This led to a collaboration between PSA’s method development engineering team and Altair’s domain experts.

Customer Stories, Technical Papers

Developing an Injury Threshold for Human Brain Concussion

Directed by Dr. King Yang, Professor of Bioengineering, the Department’s Bioengineering Center is a leading laboratory focused on research into impact trauma, low back pain, and sports injury biomechanics. For the development of complete understa...

Customer Stories

CalsonicKansei North America

CKNA contacted Altair ProductDesign for training on the Squeak and Rattle Director, which led to more in-depth consultation on the squeak and rattle methodologies, ultimately saving the company time and money by helping them identify detrimental i...

Customer Stories, Videos

Inspired by Nature: Electric Motorcycle goes 3D - Combining Topology Optimization, New Materials, and Additive Manufacturing in the Development of the Airbus APWorks Light Rider Results in a Revolutionary Lightweight Design

The Airbus APWorks Light Rider is the world's first 3D printed motorcycle prototype. Altair OptiStruct® was used for inspiration of its organic structure. Using additive manufacturing, a simulation-driven design process approach and topology optim...

Customer Stories

Sintavia

Sintavia utilized Altair Inspire to prove the ability to additively manufacture optimized aerospace replacement parts that exceed existing part performance while decreasing
the overall weight.

Customer Stories

Top Use Cases: ProteusDS

Presentation introducing a few of the top use cases for the dynamics analysis software, ProteusDS.

Customer Stories

Success Story: OHB System AG

HyperWorks and the Altair Partner Alliance Streamline Development Process of Optical Satellite Components at OHB System AG.

Customer Stories

Developing a New Safety System for the Rail Industry with Sharma & Associates

Sharma & Associates (SA), a Chicago-based consulting firm that is focused on providing engineering solutions to the railroad industry, led the effort. Since 1995, SA have delivered safe, effective and efficient solutions to its customers, which in...

Customer Testimonials, Videos

AMETEK

AMETEK utilized model-based development to develop a new embedded control system for a aerospace suit  chiller unit under a very tight schedule and high safety standards.

Customer Stories

Thales Alenia Space

Companies from across a wide range of industries are attempting to find the potential impact that additive manufacturing (AM) could have on design and manufacturing processes. During its own efforts to explore AM and its potential for space satell...

Customer Stories

Bremar Automotion uses Altair RADIOSS to Design & Certify FIA Motorsport Roll Cages

“The Altair product is it for us in terms of simulation. That’s all we use. It’s great to be able to show such good correlation between the simulations and physical testing, and to have confidence in not only our approach, but also the Altair prod...

Customer Stories

Application of HyperWorks to Develop Human Body Models to Assess Injury Potential for Vulnerable Populations in Vehicle Crashes

The effects of obesity on occupant responses
in frontal collisions were investigated using
the UMTRI whole-body human finite element
models. A modeling approach was developed
and applied that allowed for rapid change of a
baseline human body model into geometries
representing adults with diffe

Customer Stories

Student Racing Team from Politecnico di Torino uses HyperWorks to Improve Weight, Manufacturability, and the Performance of Race Car

The students used HyperWorks which resulted in a weight reduction of 30% for those parts that were taken under consideration.

Customer Stories

U-Shin Improves Product Design of Automotive Parts with Altair CAE Solutions

U-Shin is a global automotive part supplier, specializing in the development and production of automotive system appliances and mechatronics products as well as on the research of element technologies. Safety, reliability, adaptability, quality, e...

Customer Stories

Studio-X

Studio-X and Tokyo DIGITAL use topology optimization to improve structural optimization and enhances building performance while reducing assembly time and material waste with lightweight design. 

Customer Stories

Reducing Weld Distortion by 93% with HyperStudy

Gestamp Tallent Ltd is a world class designer, developer and manufacturer of cutting edge, chassis structural and suspension products, body in white structures, modules and systems for the automotive industry. Gestamp used the BMW MINI front subfr...

Customer Stories

HyperWorks Virtual Wind Tunnel on Cray: Benchmarks and Recommended Configurations

With Altair’s HyperWorks Virtual Wind Tunnel running on Cray XC30 or CS300 systems, manufacturers of all sizes can now predict a vehicle’s external aerodynamic performance without the need for numerous physical wind tunnel tests. This document inc...

Customer Stories

PBS Professional Wins at NCI Raijin, Largest Supercomputer in Southern Hemisphere

Australia’s National Computational Infrastructure (NCI) chose PBS Professional to manage workload for its ‘Raijin’ cluster from Fujitsu, the largest supercomputing system in Australia with over 1000 users.

Customer Stories

Evenflo

Evenflo employs topology optimization and generative design simulation for “sustaining engineering” where fast turnaround is essential for functional improvements of  infant car seats design.

Customer Stories

QIMR Case Study: Altair and Dell Improve HPC Capabilities for Leading Research Institute

Queensland Institute of Medical Research (QIMR) is using PBS Professional on a Dell cluster to improve HPC computing. According to the CIO, “Everyone has benefited from this installation. Researchers can do things they couldn’t do before, like run...

Customer Stories

Danish Team Uses HyperWorks to Prove the Value of Topology Optimization for Concrete Architectural Structures

Denmark’s Aarhus School of Architecture
was interested in exploring the potential
of applying the kind of simulation-based
topology optimization used in the automotive,
aeronautical and naval industries to
architectural concrete structures and coupling
it with robotic fabrication of polystyren

Customer Stories

Intel AcuSolve Case Study: Analyzing Complex Designs Faster

Working in collaboration with Intel’s technical support team and utilizing key Intel® software development tools, Altair was able to improve performance, scalability, and time-to-results for AcuSolve, Altair’s leading CFD flow solver.

Customer Stories

[AB]structures Relies on HyperWorks in Developing Three Record Breaking Round the World Racing Yachts

[AB]structures, an Italian structural design and engineering company, used the CAE suite HyperWorks first for the Volvo Ocean Race in 2006 to design the yacht for the ABN AMRO White team and has used it since then successfully for several other Volvo Ocean Race and America’s Cup yachts.


This ye

Customer Stories

AcuSolve & RADIOSS Solution on FSI Model

This benchmark demonstrates the ability of AcuSolve to capture the effect of impulse load on a profile submerged in channel flow. A P-FSI simulations is performed using the structural output from RADIOSS.

Customer Stories

Scania

Reducing the Development Cycle with Assembly Automation

European based heavy vehicles manufacturer, Scania, is known for its ability to deliver highly customized products. This concept creates a significant challenge for computer aided engineering (CAE) departments, as engineers mu

Customer Stories

Assystem Used HyperWorks CAE Simulation to Design, Simulate and Test Nuclear Encapsulation Vessels

Assystem is an international engineering and innovation consultancy group with a presence in 14 countries and 8500 employees.

HyperMesh, RADIOSS and HyperStudy were used to design the safest possible nuclear encapsulation vessel for securely containing nuclear material. The designs not only achie

Customer Stories

Lighter Helicopter Design

During the lifetime of a helicopter, every superfluous pound of weight costs the owner thousands
of Euros. These costs arise due to the additional fuel needed to move the extra mass thus limiting
the amount of cargo the helicopter can transport. To build lighter helicopters, Eurocopter, Europe’s

Customer Stories

Approaching Learning Differently at Nelson Mandela University in South Africa

Watch this short video to find out how the Faculty of Engineering is approaching teaching differently with the help of Altair's learning tools.

Customer Testimonials

HyperWorks at Wagon Automotive: Speeding Development Time While Cutting Prototype Costs

Wagon Automotive, a system and module supplier of components to major car builders,
sought ways to accelerate product development and reduce prototyping costs while maintaining high quality.
Adopting the HyperWorks suite of advanced CAE tools enabled the company to achieve both those goals.
Wagon

Customer Stories

PBS Professional at GE's Oil & Gas Business: Putting an Engineering Cluster to Work

Next time you stop to fill your fuel tank, reflect on the fact that a company on the sunny slopes of Tuscany may have helped to make it possible. Nuovo Pignone, now a key technological component of GE's Oil & Gas business, began life 100 years ago...

Customer Stories
373 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!