Resource Library

GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

The BHGE Secondary Flow & Heat Transfer team is dedicated to a large variety of analyses in the gas turbine design process. The scope is the estimation of the secondary air requirements for the entire turbine, including rotor, casing, flow path co...

Customer Stories

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid™ to evaluate the biomechanics of bone stresses.

Customer Stories

Fallbrook Technologies

Traction-based, patented NuVinci® transmission, is a continuously variable planetary (CVP) technology enabling performance and efficiency improvements for machines that use an engine, pump, motor, or geared transmission systems. Fallbrook Technolo...

Customer Stories

Novum: University of Michigan Participates in Solar Car Challenges Around the World

See how Altair's Software is used to get University of Michigan's solar car, Novum, to the next level to compete in the World Solar Challenge in Australia and the American Solar Challenge - crossing an entire continent in both cases just on the po...

Customer Stories, Video Testimonials

Improving Composite Design and Simulation Efficiency with Multiscale Designer

Dr. Jan-Philipp Fuhr - Managing Partner, Cikoni talks about developing a methodology to analyze and predict composite matrix and fiber failure using Altair OptiStruct and Multiscale Designer resulting in improved accuracy and simulation efficiency...

Customer Stories, Video Testimonials

Optimization of Photovoltaic (PV) Mounting Structures – Savings on Material and Cost

Photovoltaic specialist Thesan, a subsidiary of global manufacturer Savio S.p.A, manufactures, and distributes mounting structures, consisting of a so-called Purlin, a Rafter, and a Pole (and Hat), designed to withstand potentially occurring loads...

Customer Stories

No more Gone with the Wind – Pedestrian Comfort Improvements on Quinta Torre with AcuSolve Computational Fluid Dynamics

Officially known as the Caleido project, the Fifth Tower in Madrid is owned by Inmobiliaria Espacio, a company that, among other services, deals with infrastructure and construction for all types of buildings.

Customer Stories

Using HyperWorks® to Optimize Structural Strength for Argon 18 High-performance Bikes

Argon 18 recently partnered with the ÉTS Research Chair on Engineering of Processing, Materials and Structures for Additive Manufacturing to manufacture a new track bike for Lasse Norman Hansen, one of the athletes competing for the Danish team in...

Customer Stories

Explicit Dynamic Simulation of Tool Drop on the Outer Wing of the Swift020 Unmanned Aerial System using RADIOSS®

The successful launch of a new platform UAS is a comprehensive design engineering and manufacturing endeavor. The full lifecycle must consider maintenance and replacement components. As these requirements often require the use of tools (i.e. screw...

Customer Stories

Ankers

Ankers performed co-simulation using a combined multibody and brake systems model in MotionView and Activate to generate more accurate results to analyze thermal and other effects on braking.

Customer Stories

LEIBER Group

LEIBER Group, which specializes in developing lightweight metal components, applied topology optimization to determine the ideal shape for a vehicle suspension beam, resulting in mass savings of over 50%

Customer Stories

Mubea Relies on HyperWorks Unlimited™ for Automotive Component Design and Production

In performing lightweighting projects for large OEMs, Mubea is the only provider worldwide who delivers innovations of tailor-rolled blanks (TRB) which are ideal for not only vehicle body structural but also for suspension components that encounte...

Customer Stories

Auburn University applies HyperWorks to Optimize the Design of Composite Suspension Components and Monocoque for a SAE Formula Student Racecar

To optimize the car performance, the Auburn University SAE Racing Team focused on selected components that were most promising in terms of mass reduction with equal or increased stiffness. HyperWorks enabled them to reduce component mass-to-stiffn...

Customer Stories

Top Use Cases: ShipMo3D

Presentation introducing a few of the top use cases for the time and frequency domain analysis software, ShipMo3D.

Customer Stories

A Vision of Tomorrow's Architechture: Designing the LAVA Bionic Tower

Exploring design variants with OptiStruct's FE-based topology optimization to generate a free-form exoskeleton structure

Customer Stories

SOGECLAIR Aerospace Employs HyperWorks to Optimize Additively Manufactured Aircraft Components: Topology optimization of a large engine pylon structure

To find new development and manufacturing approach to reduce weight while ensuring safety, HyperWorks offers SOGECLAIR Aerospace an innovative, streamlined development environment with more design freedom, faster development cycles, and lower cost...

Customer Stories

Design and Optimization of a High Performance C-Class Catamaran with HyperWorks

Born in 1961, based on a challenge between
Great Britain and the United States about who
builds the fastest catamarans, the ‘C-Class’
has been the driver of many innovations in
the world of multihull sailing.

Customer Stories

Baker Hughes Drills 60% off Product Development Time With HyperWorks-Driven Simulation

One of the world’s leading suppliers
of oilfield services, products, technology
and systems, Baker Hughes operates globally
with nearly 59,000 employees. The company,
headquartered in Houston, Texas, recently
recorded $21.4 billion in annual revenue
from sales of both services and highly
inno

Customer Stories

NASA Develops Wireless Sensors to Detect Lightning Strike Damage to Composite Aircraft

Computational electromagnetic software enables a team of researchers at NASA’s Langley Research Center to develop wireless resonant sensors that can measure and mitigate lightning strike damage to composite aircraft.

By Beverly A. Beckert
Concept To Reality Winter/ Spring 2015

Customer Stories

MAHLE

Analysis of MAHLE's automotive components and systems creates a huge amount of simulation data which is used to generate project reports. This reporting process can be a slow, manual process that ties up a great deal of the engineering team’s time...

Customer Stories

AAM

American Axle & Manufacturing employed topology optimization and FEA to redesign an automotive carrier to achieve a weight reduction of 20%.

Customer Stories

DECKED

The huge capacity of a pickup comes at the expense of storage. The loading area is often a simple box with no ability to store smaller items safely or secure them from theft. After spotting an opportunity in the marketplace, entrepreneur, Lance Me...

Customer Stories

Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics

Recent trends in wind power technology are focusing on increasing power output through an increase in rotor diameter. As the rotor diameter increases, aeroelastic effects become increasingly important in the design of an efficient blade.

Customer Stories

Computational Analysis of Quadriceps Tendon Force Following Total Knee Replacement Surgery Leads to Improved Patient Knee Flexure

Anterior knee pain is a significant complication following total knee arthroplasty (TKA) surgery. The inability to freely extend/flex the knee has a crucial influence on patients daily activities including walking, lifting and rising from a chair....

Customer Stories

CAE Technology Applicable to the Aerospace Industry - JEC Reprint

In this article, published on the May 2014 issue of JEC Composites Magazine, Shan Nageswaran explains why the latest version of HyperWorks® represents the most advanced evolution of computer-aided engineering (CAE) technology applicable to the aer...

Customer Stories

Intel Solution Brief: Maximize Performance and Scalability of RADIOSS on Intel® Xeon® Processor E7 v2 Family-Based Platforms

This paper summarizes the findings of a benchmark study with RADIOSS and Intel® Xeon® processors. In the study, Altair benchmarked RADIOSS using a modified crash simulation model on a single-node platform -- RADIOSS was able to easily take advanta...

Customer Stories

DSM Success Story

Thermal Analysis of LED Lamps using AcuSolve

Customer Stories

Streamlining Aerodynamic CFD Analyses

External aerodynamic simulations using computational fluid dynamics (CFD) are well established tools in the product development process for
the automotive and aerospace industries. CFD simulation technology helps engineers to understand the physical phenomena taking place in
their design and pro

Customer Stories

The Successful Application of HyperWorks at Lenovo

To increase efficiency, improve the quality of meshing and shorten CAE simulation time, Lenovo engineers needed to own a powerful pre-processing tool, one that would really meet the demands of scientific research and engineering innovation. For th...

Customer Stories

Samsung Uses OptiStruct to Redesign Washing Machine Component for Optimized Weight and Material Usage

To carry out optimization on the pulley, Suzhou Samsung chose OptiStruct, a key
component of Altair’s HyperWorks suite of computer-aided engineering tools and a
modern structural analysis and optimization solver. “OptiStruct provided us with important optimization features,” said Mr. Cheng, “such

Customer Stories

Dana Adopts Altair’s SimLab to Automate Meshing of Powertrain Models with Dramatic Time Savings

Dana Holding Corporation is a world
leader in driveline, sealing, and thermalmanagement
technologies that improve
fuel efficiency, reduce emissions and
lower the cost of ownership in passenger,
commercial and off-highway vehicles.
Dana's 25,000 employees operate in
27 countries within a netwo

Customer Stories

Dante Sanchez Discusses the Optimization of Mabe's White Goods Packaging

For white goods manufacturer Mabe, the quality of the design and engineering of their home appliances is paramount. The objectives of this project were to simulate the effect of the distribution environment events to a washer and dryer product and...

Customer Testimonials, Videos

Intel Case Study: Altair Speeds Complex Simulations and Workload Management with RADIOSS and PBS Professional on Xeon Phi

Altair is one of the first software vendors to support the Intel Xeon Phi Coprocessor. PBS Professional, Altair’s leading workload management product, supports Xeon Phi out of the box, and we have ported our RADIOSS solver to Xeon Phi.

Customer Stories

Weizmann Institute Case Study: Switching to PBS Professional for HP Clusters

The Weizmann Institute replaced Moab with PBS Professional to manage a 3,096-core HP cluster shared among hundreds of users. The transition process was easy, thanks to Altair’s excellent customer services and support. Now, the Institute enjoys hig...

Customer Stories

Topology Optimization Used to Make Lighter Plastic Parts

Kanto Auto Works, Ltd. is a core member of the Toyota Group, developing and producing Toyota vehicle bodies. The company’s organic-material engineering department evaluates and develops plastic parts to be used in vehicle bodies. In the initial st...

Customer Stories

AcuSolve & RADIOSS Solution on FSI Model

This benchmark demonstrates the ability of AcuSolve to capture the effect of impulse load on a profile submerged in channel flow. A P-FSI simulations is performed using the structural output from RADIOSS.

Customer Stories

MIMOS Berhad Delivers HPC Across Malaysia with Cloud

In partnering with PBS Works, MIMOS Berhad
brought onboard a strategic collaborator
committed to help its clients overcome
these limitations by deploying Altair's
PBS Professional®, the industry leading
commercial workload management and job
scheduling solution.

Customer Stories

Application of HyperWorks in the Subsea Oil and Gas Industry

The volatile nature of deep sea installations presents a difficult challenge for engineers
to create products which can withstand extremely high pressures in a variety of weather
conditions. Duco selected HyperWorks to model subsea umbilicals, resulting in improvements
to their analysis productiv

Customer Stories

PBS Professional at TGen: Cutting Time to Discovery

In recent years, corporations and research institutions around the world have applied massive computational resources to defining the makeup of the human genome. One of the greatest challenges is to translate that knowledge into therapeutics and d...

Customer Stories

Ford Focus STREET: Getting Real in Six Weeks

Technology partners collaborate in style to deliver a specialty vehicle based on the Ford Focus platform.

Customer Stories
373 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!